V-Twin Forum banner

Best Outer Cam Bearing??

2907 Views 10 Replies 5 Participants Last post by  YankeeBob
Going to do my cams this winter and switching over to gear drives. The S&S kit comes with torrington for the inners and Nachi 6004 for the outer. Are these Nachi the best bearings to use or are there better ones out. Seem easy enough to switch them befiore they go in. Thanks
Paul
1 - 1 of 11 Posts
All righty then.........

shrike96 said:
I actually was not questioning the success of the kit really, was more wondering on the bearing since its a name i didn't reconize and i wanted to determine if S&S had switched bearings in the kit. Needed more of a clarifaction on that issue.
Although LAF has quite a valid point, I know it is not what you are after. In my line of work, bearings are cheap insurance, always go for the best.
Perhaps you will recognize some of the brands listed below - there are a lot of bearing cross reference sites online. I would be confident that the supplied bearing would be suitable and rated for the load it is subjected too.

Designation Manufacturer NSK RHP Basic Dimensions Type/PartNumberNote AuxiliaryPartNotes Designation E/A Designation E/A d D B or T

6004 *** 6004 E A 20 42 12 Single-row deep groove ball bearing, open type

6004 KOYO 6004 E A 20 42 12 Single-row deep groove ball bearing, open type

6004 NACHI 6004 E A 20 42 12 Single-row deep groove ball bearing, open type

6004 NTN 6004 E A 20 42 12 Single-row deep groove ball bearing, open type

6004 SKF 6004 E A 20 42 12 Single-row deep groove ball bearing, open type

6004-2NKE NACHI 6004VV E A 20 42 12 Single-row deep groove ball bearing, non-contact sealed type

6004-2NSE NACHI 6004DDU E A 20 42 12 Single-row deep groove ball bearing, contact sealed type

6004-2RS1 SKF 6004DDU E A 20 42 12 Single-row deep groove ball bearing, contact sealded type

6004-2Z SKF 6004ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type

6004.2RS KOYO 6004DDU E A 20 42 12 Single-row deep groove ball bearing, contact sealded type

6004.2RSR *** 6004DDU E A 20 42 12 Single-row deep groove ball bearing, contact sealed type

6004.2RU KOYO 6004VV E A 20 42 12 Single-row deep groove ball bearing, non-contact sealed type

6004.2ZR *** 6004ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type

6004E INA HR6004 A A 20 42 12 Single-row deep groove ball bearing, open type

6004H INA 6004-H- E A 20 42 12 Single-row deep groove ball bearing, open type

6004H 2RS INA 6004-H-DDU A A 20 42 12 Single-row deep groove ball bearing, contact sealed type

6004H 2Z INA 6004-H-ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type

6004LLB NTN 6004VV E A 20 42 12 Single-row deep groove ball bearing, non-contact sealded type

6004LLU NTN 6004DDU E A 20 42 12 Single-row deep groove ball bearing, contact sealded type

6004N *** 6004N E 6004N A 20 42 12 Single-row deep groove ball bearing, with snap ring groove

6004N KOYO 6004N E 6004N A 20 42 12 Single-row deep groove ball bearing, with snap ring groove

6004N NACHI 6004N E 6004N A 20 42 12 Single-row deep groove ball bearing, with snap ring groove

6004N NTN 6004N E 6004N A 20 42 12 Single-row deep groove ball bearing, with snap ring groove

6004N SKF 6004N E 6004N A 20 42 12 Single-row deep groove ball bearing, with snap ring groove

6004N+SP42 *** 6004NR E A 20 42 12 Single-row deep groove ball bearing, with snap ring

6004NR KOYO 6004NR E A 20 42 12 Single-row deep groove ball bearing, with snap ring

6004NR NACHI 6004NR E A 20 42 12 Single-row deep groove ball bearing, with snap ring

6004NR NTN 6004NR E A 20 42 12 Single-row deep groove ball bearing, with snap ring

6004NR SKF 6004NR E A 20 42 12 Single-row deep groove ball bearing, with snap ring

6004ZZ KOYO 6004ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type

6004ZZ NTN 6004ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type

6004ZZE NACHI 6004ZZ E A 20 42 12 Single-row deep groove ball bearing, shielded type
See less See more
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top