V-Twin Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
189 Posts
Discussion Starter #1
Just curious if I can use a crank from a B motor in an A motor? I know the otherway around is not possible due to the couter balancers but if they are not used, will the crank fit in the case?

Looking for a stoker for an 06 A motor and found one for an 00-06 B motor.
 

·
Still the Same!
Joined
·
1,781 Posts
nope. that B crank will still have the gear on it to run the balancers and won't fit inside of an A case.
 

·
Premium Member
Joined
·
439 Posts
The balancer gear and the inner bearing race need to be removed and replaced with the wider inner bearing race of the A motor which sets up the gap etc on the oil pump...........

Ozroder
 

·
Registered
Joined
·
275 Posts
I have 2 4.375" A cranks forsale. PM me if interested.
 
1 - 4 of 4 Posts
Top