V-Twin Forum banner

Any tips on getting around shifter shaft 2000 dyna

1393 Views 9 Replies 5 Participants Last post by  JRockStar
I'm removing the inner primary and ran into a problem of getting around the shifter shaft to be able to lock up the compensator/clutch so I can remove them. It's a 2000 dyna superglide that's got a leaking inner seal. I'm quite capable as a mechanic and have good tools but am getting beaten be a shifter tube. Lol. any tips would be greatly appreciated and tried
1 - 1 of 10 Posts
Remove the tube that surrounds the shift lever. With the tube out of the way the shift lever can be moved out of the way.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.