i've got a 2002 883 custom and want to get rid of my hamcan filter and put on a round one. I'm installing the dynojet kit so i need a decent filter. do i just get a support bracket and breather kit and then slap on any filter from a big twin? thanx for any help
air cleaner
Join the discussion
Recommended Reading
-
Twin cam Crank Case Pressure
Twin-Cam EngineMy 2000 Dyna with 30,000mi has been sitting for a year. This off season I took it into a shop to have the Tensioner shoes replaced with "Cycos". All new timing chest bearings. I did not have the tech install adjustable push rods, had the rocker boxed removed, installed rocker lockers and...- 13
- 289
-
00fxd · updated
-
oil pressure, lack of
Twin-Cam EngineFirst time here. 2013 Limited. 103 with a 107 kit. first time assembled, no oil pressure when cranking. Pulled everything, put in new crank, cam plate (S&S) with oil pump, still no oil pressure. Once it went to 20psi, then back to zero. Cannot locate anything suggesting a problem.bike has been...- 6
- 103
-
00 FLHRI Check engine lamp error
Twin-Cam EngineI have a 2000 Road King with S&S 106 kit, .585G cams, horsepower inc 53mm throttle body(magnetti marelli system), power commander 3 usb. I just completed a top end job and bike does not want to run without missing and sputtering. I checked the check engine lamp diagnostics and it indicate...- 0
- 33
-
jbxmn · updated
-
Baker Drivetrain Sprocket mess!
Twin-Cam EngineHowdy y'all, Long time, no talk since I left Switzerland to return home in the USA. I have been lurking out here occasionally reading the board. Mostly busy re-building a new life and work. Gentlemen, my bike has been running pretty good since my return to the States once I re-tuned it for...- 9
- 264
-
Expat in CH · updated
-
Engine Numbers
Twin-Cam EngineI have a twin cam that I cannot identify who the manufacture is. It’s a 10-digit number stamped on the bottom front of the right side case.- 1
- 128
-
Ericchavez13 · updated
Join now to ask and comment!