V-Twin Forum banner
1 - 1 of 1 Posts

· Who? Me?
Joined
·
187 Posts
Having just finished the 98 build on my Road King, I can tell you that it isnt all that tuff. Just take your time and double check everything. Some things off the top of my head to watch out for include making sure the cam bearings go in with the printed side facing you, make sure you dont drop anything in the case when the cylinders come off, dont over torque the cam plate, oil pump and cam cover bolts, and make sure those same holes are clear of oil and other debris. I have seen pictures of cracked cases from over torqueing those bolts. It aint pretty. Dont be afraid to ask questions. I asked a million stupid questions on this board and from HDWRENCH. I figured I would rather ask questions than screw something up. Bike runs pretty well, started first try.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top