Hey folks....it's time to change my rear brake pads....I have stock rotors and am looking for the best way to go with new pads. I do pretty tame street riding with lots of time spent on country roads, so lots of control braking. I also recently upgraded to a RevTech 100 with quite a bit more kick. Any ideas on pad types? Thanks, Johnny....
'96 Road King brake pads
Join the discussion
Recommended Reading
-
2014 103" argument help
Twin-Cam EngineDoes a 103" 2014 Heritage have a govenor? What is the top speed? Please help end this argument.- 45
- 13K
-
Harley-Racer · updated
-
Troubleshooting low performance, compression test results and whats acceptable
Twin-Cam EngineSo, Ive got two FXDX bikes. One, a 99, the other an 04, carbed, and both have comparable mods. The 99 has 37k miles, a Thunderheader, Big Sucker intake, stock pistons and SE 204 cams, and made 86 lb ft and 79 hp on the dyno. The 04 has 56k miles, a Supertrapp 2-1 with closed end...- 34
- 821
-
Lowering compression with gasket thicknesses
Twin-Cam EngineConverting my 88 to a 95 and the pistons I have are specific to my heads, so I'm not getting different ones, but they're rated at 10.5:1 compression which is a little more aggressive than I'd like for this particular bike. My question is how much gasket thickness should I use to get that...- 23
- 4K
-
Adjustable pushrods
Twin-Cam EngineI am sure this has been asked and answered s million times. Sorry in advance. What are the thoughts on these brands of quick install versions? Screamin Eagle Andrew's S&S Smith brothers? (Havf a set that can utilize the factory pushrod tubes apparently) Sent from my SM-G960W using Tapatalk- 19
- 320
-
Andrew's 48H vs Andrew's 57H for my 96"
Twin-Cam EngineWhat cam would work best in my 2010 SG stock 96"motor? A 48H or 57H The 48H max [email protected] rpm and the 57H 2200-5600rpm. I want a cam that comes on reasonably early. The 57H seems to come on a bit earlier and go out a bit further at the same time. What is it that I am missing here. If...- 4
- 218
Join now to ask and comment!