V-Twin Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter #1
Hi guys.

I have a '96 Electra Glide with the stock handlebars. There is an air reservoir inside. I'm interested in getting some bars that will be about 3-4" higher and 3" or more inches back.

Any suggestions, or options ya'll can recommend would be awesome.
 

·
Registered
Joined
·
2 Posts
Hi!
Handlebars not to be used as reservior, but only as a tube to air nipple in the left side. I replace my handlebars with other, uninstall te rubber air tube and install in the end of tube nipple of the tubeless wheel. I cut nipple shorter before installing and fix it by original clamp. It works and you should use any handlebars without air holes.
 
1 - 2 of 2 Posts
Top