V-Twin Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
751 Posts
Discussion Starter · #1 ·
A friend of mine is doing the following dealer recommended build on his 06 Eglide. Tell me what you think.

95"
203 cam
high comp. forged pistons
SERT
stock heads
stock head gaskets

Thanks,
Rick
 

·
Registered
Joined
·
2,300 Posts
IMO, if you have to go that way, leave the high compression pistons on the counter and use flat tops.
 

·
Administrator
Joined
·
11,285 Posts
eglider05 said:
A friend of mine is doing the following dealer recommended build on his 06 Eglide. Tell me what you think.

95"
203 cam
high comp. forged pistons
SERT
stock heads
stock head gaskets

Thanks,
Rick
I think the forged pistons are a waste for that build, explanation here http://www.v-twinforum.com/forums/showthread.php?t=57196

I also like the SE-204 cams better. They are probably selling him new cylinders for $300, boring his stock cylinders is usually less than 1/2 the cost of SE big bore cylinders and are the EXACT same thing when done.
 
1 - 3 of 3 Posts
Top