V-Twin Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
46 Posts
Discussion Starter #1
I just bought a set of heads from a 2008 RK off of eBay to have them ported to replace the stock heads on my 2007 RK. Interestingly enough, the 2008 front head is milled/drilled/tapped for the front stabilizer link unlike my 2007 front head.

So, can I implement the upper-front stabilizer on my 2007? I'm sure there's a bracket that heeds to be on the frame as well so it may not be worth the trouble, but's it's worth askin the question.

I assume that the 2008 head is the same as the 2007 head in all other respects.
 

·
Registered
Joined
·
3,981 Posts
Belicoso_Fino said:
I just bought a set of heads from a 2008 RK off of eBay to have them ported to replace the stock heads on my 2007 RK. Interestingly enough, the 2008 front head is milled/drilled/tapped for the front stabilizer link unlike my 2007 front head.

So, can I implement the upper-front stabilizer on my 2007? I'm sure there's a bracket that heeds to be on the frame as well so it may not be worth the trouble, but's it's worth askin the question.

I assume that the 2008 head is the same as the 2007 head in all other respects.
I'll get you some new take off heads and trade you for those 08's and I'll pay shipping both ways...
 
1 - 2 of 2 Posts
Top