V-Twin Forum banner

1 - 5 of 5 Posts

·
IronButt
Joined
·
386 Posts
Discussion Starter #1
I'm About To Put My New Heads On My 07 Road King And I Have Noticed On The 88" Head Install Instructions There Are O-rings That Go In-between The Jugs And Heads. I Did Not See Any When I Removed My 96" Heads. Are They Not Used On The 96" Engines? I Just Want T Make Sure
 

·
IronButt
Joined
·
386 Posts
Discussion Starter #3
This is what I read for the 88" install instructions:

Install new O-rings over the cylinder dowels before installing the new head gasket. Installation of the O-ring first will ensure proper alignment of the head gasket.

I did not see any o-rings on my 07 96"
 

·
Premium Member
Joined
·
11,928 Posts
if using cometic head gaskets, the o-rings definately do not get used.
 

·
IronButt
Joined
·
386 Posts
Discussion Starter #5
Thanks,
My Heads Should Be Delivered This Monday And I'm Not Sure What Head Gaskets Were Snt With Them
 
1 - 5 of 5 Posts
Top