V-Twin Forum banner

2006 Dyna's {cams}

711 Views 1 Reply 2 Participants Last post by  bporcelli
Andrews will have the 2006 dyna's cams ready in about 5 weeks. No bearings in the support plate ! Cams are rolling in the aluminum ! Oil feed holes. No bushings,strange !!!!! Cams are bigger.
1 - 2 of 2 Posts
Thanks for the update!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.