V-Twin Forum banner
1 - 1 of 1 Posts

·
Hellbound Train
Joined
·
5,595 Posts
The crank bearings were changed to roller from tapered in 2003. this is a potential problem if your torque is approaching 130 lbs. For a 95" it's not a problem. Some people claim "insurance" or peace of mind but unless you are stroking it and the cases are open any way, I wouldn't and don't worry about it. Prior to 2003 is not a problem with the crank bearing but you might have a cam bearing problem if the timkin conversion was not done.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top