V-Twin Forum banner

1 - 6 of 6 Posts

·
Banned
Joined
·
10,126 Posts
Discussion Starter #1
On non-throttle by wire bikes if you install the 120R with the required throttle body can you retain cruise control??? Anybody done it?
 

·
Premium Member
Joined
·
791 Posts
Latus Motors offers a 58 mm throttle body / manifold that they developed with Dan Baisley. It offers interchangeable venturis and is also cruise compatible.

I went with their throttle body on my SE 120R in my 06 dyna. The only mod to the crate engine was a set of SE roller rockers and it produces great results. 139.92 hp and 133.7 tq.
 

·
Premium Member
Joined
·
6,900 Posts
I used a HPI 58/62 maxi flow ,all HPI T/B's are set up for cruise.
BVBOB fabricated a mount for the SE 58 mm. on his 114 also .
 

·
Premium Member
Joined
·
5,582 Posts
The SE 58 mm setup is a direct match for the head ports and it is pretty easy to make up a bracket for the cable, I simply welded on the cruise linkage to the 58 that I cut off an old tb. I also did this last month on a 120r.
 
1 - 6 of 6 Posts
Top