V-Twin Forum banner
1 - 20 of 34 Posts

·
07', 04', 03', & 02
Joined
·
1,099 Posts
Whats the rest of your build? Cams, Heads, ect.

Do you have a sheet with SAE instead of STD?

Thanks,
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #3 · (Edited)
- 258 Cam Kit
- SE TC88 Stroker Flywheel
- 4.06 Piston Kit (103+)
- 103+ Cylinder Heads
- 50mm Throttle Body (EFI)
- Rineharts
- SE Air Cleaner
- Race Tuner
- Perfect Fit Pushrods
- Bigger cyl. kit
 

·
Do'in the chicken dance
Joined
·
3,629 Posts
bozer632 said:
- 258 Cam Kit
- SE TC88 Stroker Flywheel
- 4.06 Piston Kit (103+)
- HTCC Heads
- 50mm Throttle Body (EFI)
- Rineharts
- SE Air Cleaner
- Race Tuner
- Perfect Fit Pushrods
- Bigger cyl. kit

Are those cnc htcc heads what comp ratio are you at??
Looks like you still got some tuning to do air fuel curve is kinda all over..
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #11 ·
I posted my dyno sheet hoping some of the experts would chime in but, no go as of yet. I was thinking the numbers were a little off... Any help or thoughts would be greatly appreciated.
 

·
Soar like an Eagle
Joined
·
2,570 Posts
Agreed you need to work on the A/F ratio BUT that must be a fun scoot to ride. :)
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #13 ·
Have not had a chance to ride it yet, need the snow to melt first. Is the correction of the A/F ratio something I should bring up with the dealer or should I try and find somone with better tuning skills?
 

·
Soar like an Eagle
Joined
·
2,570 Posts
Do you have a SERT or power commander on that bike, I did not see it in your parts list. Did they tune on the bike or just put it on the dyno after the build to see what you power your build is making. Yes talk to the dealer who did the build, if they don't have the folks in house then seek another dealer who does. But when you do get to ride that baby you are going to have one of those grins from ear to ear.
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #15 ·
I had the SERT installed and am unaware of what they did for tuning. I was told that it would take awhile for them to tune the bike so I guess they made an attempt. Thanks for the help!!
 
1 - 20 of 34 Posts
Top