V-Twin Forum banner

1 - 2 of 2 Posts

·
ovanay elinquentday
Joined
·
2,021 Posts
Discussion Starter #1
Any thoughts on using the new HD jugs for the 110" SE motor on a 88B with a 4" stroke? I was wondering whether one could build a 4" x 4", 100" motor by fitting the 110 jugs to a 88B, using something like the 4" Revtech Gen 3 pistons, and bolting on a set of worked over pre-07 Harley heads.
 

·
Banned
Joined
·
4,508 Posts
100"

GPO03FatBoy said:
Any thoughts on using the new HD jugs for the 110" SE motor on a 88B with a 4" stroke? I was wondering whether one could build a 4" x 4", 100" motor by fitting the 110 jugs to a 88B, using something like the 4" Revtech Gen 3 pistons, and bolting on a set of worked over pre-07 Harley heads.
Very first T/C build we ever built, was a 100" Axtell kit for a client in Syracuse, N.Y., in 1999. It ran 116 square. Far as we know, it still is running fine.
If your going to the trouble to bore the cases, why end it at spigot clearence for a 4" hole? There is bigger/better now.
 
1 - 2 of 2 Posts
Top