Hi all...
I have gathered up some of the chrome from my old bike. It will not fit the new bike, so recycling time is here..
This is used gear, but VERY well cared for with no damage. The backsides are well...the backsides.... the shiny side however, is still very shiny and will look great on your bike.
SPECS:
All this chrome is off a '99 Road King that I no longer own. (T/C 88, EFI) I'm sure it will fit many other bikes, but I'm not a parts guru, so I won't say for sure. Do your own due diligence to double check the fit for your bike.
Important note! - I did not install or remove this stuff from the bike..I don't know what nuts bolts or other pieces may be required for installation, so here's what comes with the pieces:
- The inner primary cover has a long stud, a small bracket
- Cyl base - none
- EFI fitting cover - small chrome screw and hold down clamp
- Neck covers- two bolts, small screw at top joint
- Engine/trans transition and extension - couple small screws, long stud.
You
may need to gather fasteners for yourself..I don't know..because I don't know what normally comes with them brand new. I'm telling you this now so you know and it's not a surprise when you take it from the box.
The inner primary, the neck covers, and the cylinder base pieces are Kuryakyn. The rest is MoCo.
Pics are attached
I REALLY want to sell this in a group..but...I'll break it apart if need be. If you buy it all and I can ship it in one box, I'll cover the shipping to the lower 48. If you buy onesy-twosy, then you cover the cost of shipping.. Fair enough...
- Inner Primary - New $110
- Cyl base - New $60
- EFI fitting cover -new $37
- Neck covers- New $80
- Engine/trans transition and extension - New $70 plus..
All this would sell for almost $360.00 new, plus shipping.
I'll sell the whole box for $225.00 including shipping to the lower 48
You save $135.00 plus gas money...
I take Paypal
If you have questions, call me.... if you need more pics.... call me..
Cujo
770-318-1032
.gif&contenttype=gif "PowersportModels.com")
Linear Mode
