Parts and lots of 'em for sale - 2004 FXDLI

[jkeenan213]

I have a 2004 FXDLI purchased Sept '06. The owner was distressed and had just done several upgrades only weeks before I purchased the bike. He also gave me all of the OEM parts he had replaced during the upgrades. The day after the warranty ran out, I tore the bike apart and made it a winter project, you can see my signature below.

As a result, I have quite a few parts for an '04 FXDLI...quite a few. Some of them are the originally installed parts, and bike had only 22K easy miles on it. Some are his upgrade parts (actually the rider was a "her"), which are no more than a few months used and less than 1K miles on them. Some were mounted and immediately removed and have zero miles on them (a little trial and error in my efforts). Some are actually brand new in box.

Many of these parts will fit other models and years. Fitment research is on you, but I know a lot of stuff that does and doesn't work...no matter what HD says. I'll list below what I replaced to give you an idea of what I might have around. PM me with questions, inquiries, needs, and I will gladly send pics and details. We can haggle over the price, new in box I will discount a bit below a bargain house like Zanotti, barely mounted even more, used even more. If I wouldn't re-install it on my bike, I wouldn't sell it to you, and I pitched anything that was out of spec or otherwise "ugly". I do not sell gaskets, seals, bushings or bearings as these should all be installed new...if the part has any of these they are used, I didn't/don't have the time to remove them, and you should replace them. OEM hardware you should get from a stealer or indy...unless you have an entire list the shipping will be stupid. All payments must be by Paypal with only extraordinary exceptions. This protects both of us.

What I replaced: OEM cast wheels, Dunlops with 5K on them, front and rear brakes (I have both the HD black and chrome calipers), brake pads, brake hoses, rear master cylinder (have both stock and chrome cover), rear brake linkages black and chrome, mid-mount foot controls, FXDWG forward controls, pegs (a few times), both rotors, pulley, headlight bucket, eyebrow, turn signal lenses, hoods and bulbs, handlebars (haves buckhorns and apes-new), levers, switch housings, handle bar clamps (have stock, HD "live to ride", and new FXR and the other one, both allow relocation of idiot lights to clamp), risers (a few), all control cables (a couple of sets each different lengths), console wiring harness (new), seat, inner primary, OEM clutch pack and hub, autotensioner (does not work on an FXD...bottoms out on primary case and ratchets chain too tight), jugs, pistons, rockers, lifters, rods, breathers and new rebuild kit, SE air cleaner backplate, football with LTR insert, throttle body, intake manifold, V&H Long Shots no baffles, starter, battery (tests fine), new AGM HD battery, battery cables, battery cover, electrical box cover, Iron Bags "Iron Thunder" saddlebags, top of the line Autocomm helmet-to-helmet intercom system with all the gizmos for two helmets, bike-to-bike, music, GPS connection, etc, both engine guards (the one that does not allow for forwards and the one that does), horn covers (a couple), several air filters new, oil filters new, oil pump, oil filter bracket, derby covers, inspection cover with hole, shifter linkages (a few long and short), rear shocks (chrome), swing arm, "stuff", sprockets chain and tensioner left over from gear cam conversion but not cams, all OEM fastener hardware (replaced all...all with Gr 8 chrome), headlight trim ring, spark plug wires (OEM and sterling chromite), coil, upper stabilizer link, indicator lamps-new, HD logo wheel weights-new, console gasket-new, OEM fuel gauge, frog mouth neutral switch cover-new, LED tire caps, mirrors, fender medallion, OEM engine dipstick, turnsignal mounting kit, pushrod covers, more.

I have no time for ebay, although you will see some of these items there before my patience ran out. I'd rather be riding than dreaming up flowery descriptions. PM me, I travel, but will respond as quickly as possible. I'll ship cheapest way within a couple of days, shipping is on you and we'll figure it out when we settle on price.

Ride safe.

[seamonkeyman]

G'day JKeenan,
Wanted to ask about you intercom system as my and the new OL are going on a major road trip this coming summer.

Specs, pics and links would be most appreciated.

Kind regards,

Joe
AKA Seamonkeyman

[hollowpoint]

I may be interested in the headlight bucket depending on size.
Which Iron thunder bags & what's the price?

[swhite916]

How tall are the apes you have for sale?

[BVBOB]

Got a pic of the bags?

[firetronix01]

Might be interested in the bags as well.

[powerhaulic]

I sent a PM about the T/B and intake, price please

[mnchvgs79]

Here, I turned this in to a bit of a list for you so it's easier to read.

I am interested in what you have for "Indicator lights"

Originally Posted by jkeenan213

1. OEM cast wheels,
2. Dunlops with 5K on them,
3. front and rear brakes (I have both the HD black and chrome calipers),
4. brake pads,
5. brake hoses,
6. rear master cylinder (have both stock and chrome cover),
7. rear brake linkages black and chrome, mid-mount foot controls,
8. FXDWG forward controls,
9. pegs (a few times),
10. both rotors, pulley,
11. headlight bucket,
12. eyebrow,
13. turn signal lenses,
14. hoods and bulbs,
15. handlebars (haves buckhorns and apes-new),
16. levers, switch housings,
17. handle bar clamps (have stock, HD "live to ride", and new FXR and the other one, both allow relocation of idiot lights to clamp),
18. risers (a few),
19. all control cables (a couple of sets each different lengths),
20. console wiring harness (new),
21. seat,
22. inner primary,
23. OEM clutch pack and hub,
24. autotensioner (does not work on an FXD...bottoms out on primary case and ratchets chain too tight),
25. jugs,
26. pistons,
27. rockers,
28. lifters,
29. rods,
30. breathers and new rebuild kit,
31. SE air cleaner backplate,
32. football with LTR insert,
33. throttle body,
34. intake manifold,
35. V&H Long Shots no baffles,
36. starter,
37. battery (tests fine),
38. new AGM HD battery,
39. battery cables,
40. battery cover,
41. electrical box cover, I
42. ron Bags "Iron Thunder" saddlebags,
43. top of the line Autocomm helmet-to-helmet intercom system with all the gizmos for two helmets, bike-to-bike, music, GPS connection, etc,
44. both engine guards (the one that does not allow for forwards and the one that does),
45. horn covers (a couple),
46. several air filters new,
47. oil filters new,
48. oil pump,
49. oil filter bracket,
50. derby covers,
51. inspection cover with hole,
52. shifter linkages (a few long and short),
53. rear shocks (chrome),
54. swing arm, "stuff",
55. sprockets chain and tensioner left over from gear cam conversion but not cams,
56. all OEM fastener hardware (replaced all...all with Gr 8 chrome),
57. headlight trim ring,
58. spark plug wires (OEM and sterling chromite),
59. coil,
60. upper stabilizer link,
61. indicator lamps-new,
62. HD logo wheel weights-new,
63. console gasket-new,
64. OEM fuel gauge,
65. frog mouth neutral switch cover-new,
66. LED tire caps,
67. mirrors,
68. fender medallion,
69. OEM engine dipstick,
70. turnsignal mounting kit,
71. pushrod covers, more.

[quicksilver49]

too much to remimber, what about the forward controls? lincage pegs etc...
let me know, quicksilver@eastex.net