Originally Posted by boriqua_biker
I need some help identifying the manufacturer, a couple of weeks ago I stopped at a bike show and saw an oil cooler with a built in electric fan, the assembly was mounted on the down tubes in front of the engine. I have to guess the cooler is approx. 5" x 10" in size and did not look out of place on the bike.
any idea who makes such a cooler?
Spurgin Oil Cooler Las Vegas, NV no fans.
This good looking oil cooler begins with the CNC machined billet aluminum main adapter. With its built in patented thermostat it automatically feeds and governs oil into the cooler to maintain proper operating temperatures whether you are standing still, in a traffic jam or cruising at highway speeds. When oil temperatures reach 190 degrees it automatically bypasses its flow into the cooler.
The cooler body made also of billet aluminum, removes excess oil heat providing the maximum heat transfer for cooling. The fins line the inside of the cooler extracting excess heat as the oil passes through transferring heat to the outside fins. This unique patented design processes the oil through four times for maximum cooling.
The Spurgin Oil Cooler has been tested and is found to reduce oil temperature by 20 degrees idling and as much as 40 degrees highway riding. The cooler provides an additional 1/2 quart oil capacity which adds to the cooling process.
The Spurgin Oil Cooler comes complete with A/N fittings and stainless steel hoses. It can be installed in about 30 minutes during an oil change using the easy to follow instructions provided with the kit.
U.S. Patents #5,653,206
#5,887,561 other Patents Pending.
Road tested throughout USA, Canada & Mexico
I have the polished Billet designed cooler.
J&P sells them or buy direct from mfg. (I bought direct from mfg.) her husband (Robert Spurgin deceased) designed and patented the Spurgin Oil Cooler. (702-341-6779)
Very nice finished product comes with everything needed to install and takes about 1 hr for installation...