I'm assembling parts for a cam change. I have been running stock rockers with my S&S 570G cams. I will most likely be installing Wood TW6HG. I'm thinking it may be a good time to upgrade to roller rockers. The TP Engineering rockers look to be good quality and I can get them for $300. If anyone has them and can offer feedback, I'd appreciate it.
They tend to be a good item however, there have been a few sets that where not up to par and had some issues. A set up the R&R versions that they make are a few bucks more and if you have an issue, they are more likely to listen and take care of the issue. My experiance with TP is they are not open to that kind of thing. I ran tp for a while in my own bike , they where fine, but have replaced a few sets of those as well. I now only use R&R or the S&S versions.
Linear Mode
