can someone identify this tank

[painter jim]

hi, just picked up this fuel tank and its supposed to be a 2000 road king but i have never in my life seen a rear bracket (under seat) like on this one. i have other road king tanks around the shop and the tank itself looks like all the others except the bracket. any ideas?? will it actually fit an 00-01 road king? thanks guys for your help.

[springer-]

I'd say that was off a 95 or 96 Road King. Looks like early EFI, does it have two fuel line bungs on the bottom for a MM EFI?

I would guess it does not fit 99-up.

[painter jim]

yes it has 2 fuel fitting holes in the bottom.

[springer-]

Originally Posted by painter jim

yes it has 2 fuel fitting holes in the bottom.

Then I am going with my guess ... 95-96 Road King with MM EFI.

[kustom_flames]

This one is an 00 tank



This one was off a 96 R/K Carbed Model (same bracket but bung holes look diff)



It's possible you might have a 97-99 maybe? I know softail models went to that recessed style bung in 97...

[kustom_flames]

Sorry that 96 tank pic is so big...

[route66paul]

That is why the seats are different.

[painter jim]

hey thanks guys. those pics help alot pat. the 2000 tank is what i am used to seeing. almost all the paintjobs i do end up being on newer bikes so the pre 2000 ones i am a bit unfamiliar with.

[kustom_flames]

Good to see ya here again! Wish I were 100% sure what you got there...but I'd say for sure it's pre2000 and it could be 97-98.

[painter jim]

i drop in from time to time to see what goin on. i just havn't posted in a long time. i just get so jammed up at the shop that i dont have much time. i am there 6 days a week 14 hours a day, then there are the kids, house and everything else. i am sure you and many others know the deal. i have been slackin though, i should get on here more frequently.