|
When I first put on my pcIII, on my 06 vrsca, it was running too rich with the canned map. I had that un-burned hydrocarbon smell in mine as well. I changed oil and leaned out my map a bit. New there was no smell because its so lean from the factory. I took some of the old oil (about a tea spoon full), put a flame to it to see if it would light (raw fuel in the oil will catch fire) and it did not. I also rubed the oil between my fingers and it had a lubricating (slippery) feel. The oil did seem thinned out a little. After I leaned out the PCIII by one cell in the low area and one cell in the midrange, I no longer had the fuel smell in the oil. I had a k&n filter, v&h powershots and the pcIII. I never did get it dyno tuned but it ran great and I had no other problems at all for three years, until I traded her in (like a dumb a$$) for my 09 fatboy.
|