Speedo time clock

[SJC69]

Hi I have a replacement later type Speedo fitted to my 05 Road King Classic, the one with a clock incorporated into the mileage readout section.
What I need to know is how to set/adjust the time on the clock as it is not in my handbook or in the instruction sheet with the clock?

I assume it must be somewhere in the later '07 on model’s handbook!

Steve

[Thorns]

Turn the ignition switch to ACC or Ignition. Press the function switch until time is displayed. Press and hold the function switch until 12HR begins to blink in the speedometer display window. Release the button. When the desired time style is displayed, press and hold the function switch for five seconds. The display will switch to the time display with the hours blinking.
There is no AM or PM time setting required. So when correct hour is reached, press and hold function switch to advance to minute setting.
Press and release the function switch repeatedly to advance the hours. When the correct hour is displayed, press and hold the function switch for 5 seconds, the minutes display will start blinking. Press and release the function switch to advance the minutes display. When the correct minutes are displayed, press and hold the function switch for 5 seconds, then minutes display should stop blinking, thus the clock has been set. Turn off ign switch. Ride safe.

Thorns

[SJC69]

Thanks for that, much appreciated.

I managed to set the clock about right when the speedo was installed but have not been able to re set it to day light saving time.

Steve