V-Twin Forum banner

Freight Train Headlight Nacelle on 2012 Softail Deluxe

6K views 2 replies 2 participants last post by  MUSCL 
#1 ·
Hi fellow riders,

Can anyone help, I want to fit a Freight Train headlight nacelle to my 2012 Softail Deluxe and have been told that in order to keep the passing lights and spot lights on the bar it will need modifying.

Can anyone tell me what modifying it needs to fit?

Any help would be much appreciated.


Sent from my Motorcycle iPad app


Sent from my Motorcycle iPad app
 
#2 · (Edited)
Where the light bar mounts to the trees there are 4 tabs at one at each mounting point on the inside of the lightbar. The upper tabs need to be ground down until there is about 1/8" left on each one. The bottom tabs only need about 1/16" to 1/8" taken off of them. Or vise versa. Take a look at the and you will know what I am referring to. Remove a small amount at a time until you get it to where it will fit over the Nacelle without scratching it. Make sure you get the Nacelle with part number 67907-96C
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top