I put a 93 fxrp foot bards on my fxr and the clutch cable interferes with the brake linkage has anyone else had this problem? Also is there a good black paint to paint an inner primary with?
Yes I had the same problem; I replaced the clutch cable housing with one from a touring model. The cable enters at a different angle allowing it to clear the brake linkage.
HD has good paint, I preheated my parts to 160 deg sprayed on 2 coats then baked it for an hour at 160 deg. I used a large gas grill to heat the parts.
Love the floor boards; I did cut the brake pedal mount in half for a smaller foot print allowed me to use a smaller foot pedal
Linear Mode
