All metal front fender for Dyna

[cs1]

Does anyone make an all metal front fender for the Dyna? Something like a Fatboy style would look nice. That stock fender is way too skinny.

Tim

[84FXRP]

Originally Posted by cs1

Does anyone make an all metal front fender for the Dyna? Something like a Fatboy style would look nice. That stock fender is way too skinny.

Tim

I just used the full fender from the earlier FXR/FXD bikes on my 2005 FXD. Off with the old, and on with the new, in about 15 minutes. You don't even have to remove the front tire. I know the link below says through 2003, but it went on my '05 with no problems.

I'll try to attach a photo, I'm away from home and don't have a picture of my own bike.

http://www.harley-davidson.com/gma/g...bmLocale=en_US

[Nocc]

Originally Posted by cs1

Does anyone make an all metal front fender for the Dyna? Something like a Fatboy style would look nice. That stock fender is way too skinny.

Tim

I've been scoping out differant front fenders but haven't found any
that just bolt on. Jesse James makes a few that have a meaty look.
Cheap at around $100 but it's custom,ya have to drill holes and paint.
The 4.75 width mounting brackets makes for a narrow area. Corbin
has a nice wrap around that comes in black for $400 ouch!!!

[cs1]

Originally Posted by Nocc

I've been scoping out differant front fenders but haven't found any
that just bolt on. Jesse James makes a few that have a meaty look.
Cheap at around $100 but it's custom,ya have to drill holes and paint.
The 4.75 width mounting brackets makes for a narrow area. Corbin
has a nice wrap around that comes in black for $400 ouch!!!

Ouch is right, $400 for fiberglass is steep. I also saw a Sumax fiberglass version also.

Tim