Hole from Turn Signal Relocation Kit : V-Twin Forum: Harley Davidson Forums

p51bombay · 07-28-2010, 08:23 PM

So with the Easy Brackets kit installed I have these fugly holes left, is there anything made to cover these up? Will docking hardware fit with the rigid side plates - I suppose I can use those for something eventually.

LoneEagle964 · 07-28-2010, 08:46 PM

you could try these
http://www.harley-davidson.com/gma/g...bmLocale=en_US
not sure if they will work or not but in the 3/8 size should fill that hole
or you could put a different bolt thru and use these
http://www.harley-davidson.com/gma/g...bmLocale=en_US

hope one of those options helps .

LoneEagle

doctor robert · 07-28-2010, 09:29 PM

Not sure what holes you are trying to fill, but if it is the tear drop/oval sorta hole where the rear signals were, I had a real hard time convincing the parts guy at HD that there should be a chrome cover for the ugly hole. I searched every saddlebag instruction sheet til I found the part, then took the picture to the chrome consultant and said 'I want two of these, and here is the part number'. I think they were about seven dollars each. Crazy price! Let me know if you need what I described. I have two extra.

p51bombay · 07-28-2010, 09:46 PM

Could you post the number of the part and the kit it sb number?

doctor robert · 07-28-2010, 09:54 PM

I was afraid you were going to ask that. I do not think I have the part number now, but let me look tomorrow. Is my description what you think you need?