Dyna CVO Exhaust Options

[fkopas]

What options are out there to replace the stock exhaust on the Dyna CVO? It is just too quiet. I live in CA and apparently Harley has not approved anything like Vance & Hines. Thoughts?

[nmer]

I put on Rush Slip On Mufflers with the 1.75 baffle and a SE Race Tuner. The bike is a little louder than I wanted and much louder than stock so I ordered some 1.5 baffles and they have been back ordered for over a month. The bike was tuned and the Dyno showed 120 Torque and 100 HP and I do not want to screw around with these numbers, so when the 1.5 baffle comes in I may not even put them on. But I am in Oregon and do not know what the California boys would say.

[Mohead1]

I had V&H Bigshot staggereds installed by the factory before I picked the bike up new (07 SE Dyna). The dealer claimed they were the only pipes at the time that had approval and bungs for the O2 sensors. There is a canned SERT tune for the 110 with these pipes too. Of course I pulled the baffles, installed Big City Thunder baffles. It sounds radical, and I only lost a little on the bottom end. Just need to play with the tune for the low and mid range, it seems to be a little lean in this area.

Mo