I've got some of the older model SE pipes (before they outlawed them). Are there different baffles you can put in these to change the sound? Make louder, quieter or lower?
If they are the ones I have, I think the 65115-98b, the wild pig baffles will fit in there. So, I think the rush baffles will fit too. You just have to drill a hole so you can bolt the baffles in there. You have to go and buy three bolts and nuts to bolt the end caps on the pipes since they will not be bolted to the baffle anymore. Hope this helps.
Actually, Wild Pig and Rush make a baffle that will work with the end caps. I have a set of the Wild Pig baffles that I had in my Kerker mufflers for a while. I am getting old and they were a bit loud for me.
I looked at your profile. I saw you had a fatboy. The advice I gave you was for a touring bike.
Yes, on a fatboy I would like the big city thunder baffles too.
I have screamin eagle 2s on an 06 heritage I bought baffles from
Big City Thunder And they bolt in the stock holes
Not sure of the name for the pipes, but they are SE straight pipes that go back to the axle below the rear footpegs. These are not slip ons, but the old SE performance pipes. and you are right, they are on a Fatboy. I'll try Big City and see what they say. Thanks
I gutted the Screamin' Eagle mufflers on my '06 Road King and installed baffles from Kerker. They were straight through performance baffles and bolted right in with the original screws. They had a nice rumble to them. Don't have the part number anymore, traded the bike in a month ago on a new Ultra Llmited.
Baffles
Linear Mode
