evo to an ultima

[simmonsp5]

hello everyone i have switched my engine from an evo to an ultima 100 ci i have the engine in and now i am hooking up everything and i've run into a problem i can't seem to figure out where the vacuum switch hose goes on the carb. this engine came with it's own carb and i'm not sure where to hook up this hose any help would be greatly appreciated

[TonyJ]

You have a mikuni on that? There should be a small nipple on the intake or back side of the carb to hook to your VOES switch.

[simmonsp5]

i've looked but i'm not seeing any probably a snake and is going to bite me i'll look again getting frustated at this point

[Den93lowboy]

my buddy has a 127 ultima , and i beleive they do not reccomend using the voes if thatr is what u r talking about

[TonyJ]

The mikuni will have a port for it right by where the choke cable attaches to the carb.

[simmonsp5]

ok i found a nipple on the back and the hose fit on it so i hope this it. itis by the choke line.

[TonyJ]

Thats it. Have fun.