Starter clutch

[heavyduty]

I need to replace the starter clutch on a 98 wideglide. Can I get to it by removing the outer primary and the starter? Thanks

[1997bagger]

Starter clutch is inside the starter, will need to remove the outer primary to get the jackshaft bolt out to remove the starter.

[POPS87FXR]

If you are going to wrench on your bike buy the sevice manual, parts manual comes in handy also.
I will write up any of my techs who do not have the service manual for the bike they are working on out open and on their lift

[econnor]

Originally Posted by POPS87FXR

If you are going to wrench on your bike buy the sevice manual, parts manual comes in handy also.
I will write up any of my techs who do not have the service manual for the bike they are working on out open and on their lift

This seems a little chicken **** to me. I bet 'your' techs think very highly of you.

Back on subject. The starter clutch is easy to replace. Remove the starter, then there are only a couple of bolts on the starter to remove to open it up. Not hard. Just be sure to disconnect the battery first.

[heavyduty]

Thanks! fOR The info!