Maps for Power Commander

[DynojetResearch]

I have attached an updated version for you to try. I cannot stress strongly enough that you cannot tune a fuel injected bike by "reading the plugs". Please do not use this an judgement of performance.

The attached version has timing taken out in the off idle area and the fuel has been leaned out in several places. See if the "on road" performance is better.

With as many of our dynos that are out there with AFR equipment I am supprised you found one of the few Mustang dynos in the field. You might try to find one of our centers for future testing.

[hogg831]

Originally Posted by hogg831

This thread is for posting MAPS only! All comments (other than the person posting the MAP) will be removed............

If you have questions, make a note of the poster's name and ask the question in a new thread or the one already open for discussion.

Pay attention.....please!

[99vermont]

I tried to down load a couple of maps to compare to one I have been working on. The down load only gives me the description file. Aim I doing some thing wrong?

[ShakyJake]

I have a 2000 Ultra Glide with the following "enhancements"

Ported/Flowed heads decked .60
95" Mahle Flat top pistons
Wood TW6HG Cams
10.5 -1 Compression
Thunderheader 2 into 1 pipes
Wood 325 CFM 8" hi flow air filter
Cometic .030 Head gasket
Delkron Cam Plate
Power Commander PCIIIR

If anyone has a map that will come anywhere close I would appreciate it to use as at least a starting point.

[uniondog]

103 / Andrews 54H cams / D&D fat Cat (Quite Baffle) 1.9 intake / Stock ex. / Please e-mail to
iue707@hotmail.com

Thanks
UD

[pan-bobber]

MAP Request #2
Hi together

first and a little bit frustrating - registered (free) users are not allowed to download maps from the forum :-((

second my regest :-))

Ultra Glide 2003
TC88
Stage I (a.o. SE Aircleaner, opened orig. US-Muffler,..)

what map you can recommend?

regards