Maps for HD Race Tuner

[Poseidon]

Please only Post Maps, their description, the parts used with them (including model numbers) and dyno run if available in this thread.

[Poseidon]

************Format Example****************

Map Name:
3287002.MT2

Application:
2001 & Up Softail 1450 TCB (Stage I)

Parts List:
SE Breather and Air Cleaner Kit P/N: 29440-99A
SE II Slip Fit Mufflers P/N: 80349-00A

Description:
This is the standard map for the Stage I provided by HD in the Race Tuner.

Notes:
I wanted to get this thread started, please try to keep this format on future posts.

************Format Example****************

[Poseidon]

Map Name:
3288102A.MT2

Application:
2002 & Later FL Stroker Alpha 1690 High Output

Parts List:
SE 103 CI stroker Flywheels P/N 23600-00
SE 1550 Big Bore Cylinders P/N 16546-99 or 16549-99
SE Stroker Forged Pistons P/N 22942-00
SE 258 Cam P/N 25137-00
SE Air Cleaner P/N: 29440-99B
SE Slip Fit Mufflers P/N: 65115-98B

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[Poseidon]

Map Name:
3288202A.MT2

Application:
2001 & Later Softail Stroker Beta 1690 High Output

Parts List:
SE 103 CI stroker Flywheels P/N 23703-02
SE 1550 Big Bore Cylinders P/N 16546-99 or 16549-99
SE Stroker Forged Pistons P/N 22942-00
SE 258 Cam P/N 25137-00
SE Air Cleaner P/N: 29440-99B
SE Performance Heads P/N 16952-99A or 16953-99A
SEII Slip Fit Mufflers P/N: 80349-00A

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[Poseidon]

Map Name:
3292503.MT2

Application:
2003 SE Road King 1690 A/C and Mufflers

Parts List:
SE Air Cleaner P/N: 29440-99B
SE Slip Fit Mufflers P/N: 65115-98B

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[Poseidon]

Map Name:
3292503.MT2

Application:
2002 & Later VRSCA Slip Fit Mufflers and A/C

Parts List:
SE Performance Air Cleaner P/N: 29793-02
SE Slip Fit Muffler Kit P/N: 65030-02

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[Poseidon]

Map Name:
3260702.MT2

Application:
2002 & Later VRSCA (Domestic and HDI) w/ 16 Gauge Double Barrel Mufflers and A/C

Parts List:
SE Performance Air Cleaner P/N: 29793-02
SE 16 Gauge Double Barrel Muffler Kit P/N: 64798-02

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[Poseidon]

Map Name:
3202802B.MT2

Application:
2002 & Later VRSCA (HDI) Slip Fit Mufflers and A/C

Parts List:
SE Performance Air Cleaner P/N: 29793-02
SE Slip Fit Muffler Kit P/N: 65030-02

Description:
This is a standard map provided by HD in the Tuner version 3.1.3.

[mjw930]

Map Name:
105GY001-A0-MJW1.MT2

Application:
2002 & Later VRSCA V-Modded Slip Fit Mufflers A/C and Topless

Parts List:
SE Performance Air Cleaner P/N: 29793-02
SE Slip Fit Muffler Kit P/N: 65030-02 (V-Modded)

Description:
This is a modified HD Race Tuner map for Version 3.5.0 (-01B)
'03 VRSCA
SE Air Filter
V-Modded SE Slip Fit Mufflers
Topless
HD 28T pulley kit

Very well tuned in the midrange reaching 70 ft-lbs @ 3800 rpm and 80.5 ft-lbs @ 6500 rpm. Peak HP = 111 @ 7800 but the dyno was having trouble above 8000 rpm, it's an old DJ150 that rarely sees more than 6000 rpm. The tech estimated ~115 - 118 HP on the top end if the dyno wasn't acting up.

I should have a better chart and possibly a finer tuned map in a couple of weeks after I spend some quality time on an eddy current dyno.

[MegaGlide]

Map Name:
127LF004-2j.MT5 (v4.10)

Application:
General: 2005 Touring and FLSTSi
Specific bike this map was tuned in: 2005 FLHTCUI w/ SE A/C, V&H Basic Slip-Ons

Parts List:
SE Air Cleaner and Breather Kit P/N 29440-99C
V&H Basic Slip-Ons

Description:
Flat 13.5 AFR Dyno tuned map (runs very well with a really strong midrange, 72.31 HP, 75.58 TQ), modified by me after the tune to get rid of very minor popping during decel, high RPM upshift and when blipping the throttle from idle during downshifts and before takeoff. With this setup, better minds than mine have said that there will be some popping, and they are, of course, right. I do believe that I've got it to the absolute minimun possible, though. You really have to be listening for it during upshifts and when blipping the throttle, and it's rare now, even at that. Decel, NONE above 2k (unless you shut down at very high rpm in a low gear, in which case you wanted to be obnoxious, and even my carbed Wide Glide would do it then). Very slight burble below 2k, but I attacked it from every direction, down to using .5 increments, and this is just the best I can do.
Changes from the dyno map are contained in the tuning notes for the Front and Rear VE Tables, where all of the changes were made. Redline is 6200 RPM.

Many thanks to GRock, hdmd88, Steve Cole and others for their invaluable assistance.

Since the '05s use MT5 Files and the site won't let me upload them (hint), the file is zipped.

NOTE: New v4.12 map version posted further down in this thread, Post #13. V4.12 of the software is Part Number 32117-01D, $19.95. The 4.12 map is WAY better, virtually popless.

[nekko]

Map Name:
127H0103-666 (zipped MT5 file)

Application:
2005 Fatboy TC88B (Stage I)

Parts List:
SE Breather and Air Cleaner Kit P/N: 29440-99C with Billet Air Cleaner cover P/N: 29745-00A
V&H BigShot Longs with V&H quiet baffles

Description:
This is a conservative, slight alteration of the standard map for the Stage 1 provided by HD in the Race Tuner. 9,000 miles under a variety of riding conditions and still no problems or complaints about this map. Many thanks to GRock.

Notes:
Air-Fuel Ratio Table
Changed all red zone settings (14.5) to 14.1
VE Front and Rear Cyl Tables
Added 5 to all numbers in 0 and 2% columns from 750 to 4000 rpm

[FLHRI-Tom]

************Format Example****************

Map Name:
105LF001-A0-FLRHI-Tom.mt2 (inside the zip file of same name)

Application:
2004 Touring and 2001 - 2003 FLSTSi

Configuration:
1450 SE A/C and Mufflers

Components:
SE Air Cleaner and Breather Kit P/N 29440-99B
SE Performance Touring Mufflers P/N 65115-98B or 65116-98A

Description:
My indie dyno tuned the bike. THe application, configuration and components were printed out on the map he printed for me. What is actually on the bike
2004 FLHRI, SE Air Filter, Supertrapp Supermeg 2:1 w/ all 20 disks and enclosed end disk.

Notes:
dyno run shows
old max torque = 69.3 and max HP = 61.5
new max torque = 75.0 and max HP = 67.2
************Format Example****************

[MegaGlide]

REALLY Final v4.12 Map.

Map Name:
127LF004-A1u.MT5

Application:
General: 2005 Touring and FLSTSi
Specific bike this map was tuned in: 2005 FLHTCUI w/ SE A/C, V&H Basic Slip-Ons

Parts List:
SE Air Cleaner and Breather Kit P/N 29440-99C
V&H Basic Slip-Ons


Modified version of my dyno tuned 13.5 AFR map, pretty well popless. All I did was decrement the factory decel enleanment table by 23 at all settings above 32C, added 1.5 to the rear cyl 2% VE below 2k. Had to decrement the front VE 0% above 3k by 8 to compensate for the decel enleanment changes, as well as some 0% VE adjustment below 2k. It's all in the notes.
Runs very well with a really strong midrange, 72.31 HP, 75.58 TQ.

NOTE: This is my final map. No kiddin' this time! No pops, no issues. Enjoy! Posted 4/23/05.

[balkan]

Map Name:
127HO103-A1-Blkn.MT5

Application:
05 Softail Deluxe

Components:
D&D 2-Into-2 'Power Pipe' XHP EXHAUST SYSTEM
Maximum performance staggered dual systems with 1-3/4" head pipes that enlarge to 1-7/8" then connect to 2-1/8" muffler sections. Multi-step design boosts midrange torque

SE Air Cleaner and Breather Kit P/N 29440-99C

Description:
Modified stage one map. Bike runs great!! No pops or burbles. I would imagine this map would be a great starting point for any 05 softail's that have SE Air Cleaner's and high flowing pipes. Eventually I will have the bike dynoed to see what kind of HP/TQ and AFR its pushing. The elevation in my area is 620 feet.

Thanks to MegaGlide and Grock for their invaluable assistance

[StryderKC]

Map Name:
LCB-105HM004-C1-002.MT5

Application:
General: 2004 Touring and FLSTSi
Specific bike this map was tuned in: 2004 FLHPi

Parts List:
SE Air Cleaner and Breather Kit P/N 29440-99C
Wild Pig Slip-Ons

Based on MegaGlide's excellent 4.12 map, 127LF004-A1g.MT5, for '05 models. Slightly decremented decel enleanment from 80-128 deg C. Redline set to 6K. Still some slight "burbling" at 2-3.5 K on deccel but pretty damned close.

Thanks to MegaGlide for his work and permission to base this off his work.