95" Stock Heads Dynoed 100/100

[Nicko100]

Hey Gents,new to this so bear with me.Heres my build.
2004 Fatboy
95"
SE HC Forged Pistons
SE adjustable Pushrods
SE Big Bore Intake (Port matched to Heads)
SE A/C
SE 211 Cams
07 Cast Stock Heads (CCed only)
.036 James Head Gasket (Couldn't find .030 Cometic in Australia)
Mikuni HSR42
Daytona Twin Tec Ignition (6200 Rev Limit)
SE Performance Plugs & Leads
D & D Fatcat 2-1 Standard Baffle
Compression approx 10.1:1

Dynoed at 100.91HP / 100.52TQ

This was just a test to see what the late model 07 cast heads would go like on a early 88ci based motor .I got hold of the 07 heads for $100.I know the dyno run was done in STD and should of been Done in SAE.I didn't know this at the time. But still the motor should make high 90s in both HP/TQ it was a very hot and humid day here in Australia when the bike was dynoed.Not bad for stock heads.Has anyone else done this conversion before.I will try to attach the dyno print out

[merc1100sc]

I cant see the graph but damn those seem like good numbers for stock heads. are those the 10.5:1 pistons?

[Rigidthumper]

9.6 in stock heads, 10.5 in SE heads.
Nice work, easy to live with, reliable, combo.

[Nicko100]

The comp worked out to be about 10.1:1 static.Thats with a 85cc chamber, .036 head gasket and 8.1cc domed piston

[Hillside]

VERY believeable.
Good job.
Scott