103 Build

[woodreaux]

Hey guys,
Attached is the dyno for a 07 Dyna Street Bob.
The build components are:103BB, Wood Tw6 cam (.510 lift), Fatcat w/quiet baffle and SERT. The heads were ported, cc'd and decked for 10:1 CR by Big Boyz.

The SERT was loaded with a canned HD map and this is the first and only pass.

While this is not a stellar build it is a fun build to ride with good useable power.

I would like to get it tuned. I just am not sure who is good with SERT here in Houston and I wonder if there is really any more left.

Woodreaux

[HDWRENCH]

Looks like you have a fun build there. I can think back to a 103 build with that cam and a high end port job that made just a tad more tq. looks like you got some great bang for your buck. Have fun with it , I bet with a custom map you will see some more gains if you decide to go that route.

[merc1100sc]

Cant see the graph but what are the numbers. i just did a similar build w/ a 54 cam and wondering how they compare.

[TXCHOP]

Merc...98/104....That was with a canned map from the SERT?

[merc1100sc]

TX, thanks.

I know the peak numbers dont tell the whole story but curious for comparision sake.

I have a 103 54H graph if anyone wants to post it.

[ndmp40]

Good numbers for the coin spent. 100/100 is a fun ride on a dyna. More folks should follow this build rather than try to make other parts work.

[DAMADMAN]

Yeh i think im gonna go that route.... but im gonna spend a little more ching on the heads....

[alibiforyou]

congrats on a fun ride! But you got a lot more left on the table. Get a good qaulity tune to let it really open thing up for you. Good luck

[woodreaux]

After I posted the dyno I sent an email to DOC-HDMD asking him about a good SERT tuner in the Houston area. Nice man; unfortunately he had didn't have any suggestions.

I may take a trip to visit Doc; he's in Orlando about the same distance to El Paso, TX; just around the block Texas style.

Part of my decision on not doing anymore with the build was getting tuned. I felt the limiting factor would be the tuning and did not want to get in to compression and timing issues where tuning would become hyper-critical. I will say that 100/100 is fun Thanks for all the comments.

Woodreaux

[mbkodiak]

Woodreau;

Good choice on the tuner. My recent tune on a 103 build with woods 6, rhinehart TD's and Stage II heads from Hillside resulted in a corrected dyno of 103 hp and 112.9 tq. Uncorrected was 106 and 117. You'lll see better results after the tune. My tuner was also trained by Doc.

[ceraaa42]

I'm confused. Are you going to get it tuned or ride it the way it is?

It would be interesting to see what happens to the graph with a good tune.

Chris

[ceraaa42]

Did you even get your bike tuned?

Chris