103 woods 7h

[C-Cat]

http://s263.photobucket.com/albums/i...mage2-Copy.jpg
above link is to my 103 build on an 07 streetbob
builder ran a breakin program for 100mi. and made only 4 pulls, with no changes to t-max map. he said when it breaks in more i should gain a couple points since the auto tune hasn't had a good chance to tune wide open throttle position and rings seat more . i'm more then happy with these posted corrected #'s.
woods 7h/woods springs 1.9 in. stock ex.
power pac with zippers filter
fat cat qb
10:4 to 1 compression
t-max auto tune

[towboattrash34]

looks good.... i'm doing a 95 kit and head work 10.5.1 comp with tw-7h cam hopeing to be close to those numbers....build should be complete by the 14th

[ceraaa42]

Originally Posted by C-Cat

http://s263.photobucket.com/albums/i...mage2-Copy.jpg
above link is to my 103 build on an 07 streetbob
builder ran a breakin program for 100mi. and made only 4 pulls, with no changes to t-max map. he said when it breaks in more i should gain a couple points since the auto tune hasn't had a good chance to tune wide open throttle position and rings seat more . i'm more then happy with these posted corrected #'s.
woods 7h/woods springs 1.9 in. stock ex.
power pac with zippers filter
fat cat qb
10:4 to 1 compression
t-max auto tune

Any idea where your mileage stands to this point and what kind of riding you do?

Chris

[towboattrash34]

Originally Posted by ceraaa42

Any idea where your mileage stands to this point and what kind of riding you do?

Chris

my self i'm getting 45 to 48 with my build....mix of highway and moutains

[C-Cat]

yesterday i gauged my mileage at or around 40 riding through smuggler's notch and buell's gore at a moderate pace, only ran it through the gears a couple times. normally i ride much harder and do some city riding and heavy traffic going to work, and realistically getting close to 35mpg. bike runs great, cruising or pounding it. i imagine if i wasn't running through the mountains and tried to go easy the mileage would pick up on road trips. honestly i don't pay a lot of attention to it, as sometimes it takes 15 to 20 minutes of crawling in traffic just to get out of the plant's property leaving work.
i might add my original post stated 1.9 intakes, my mistake the intakes are 1.875.
http://s263.photobucket.com/albums/i...urrent=IMG.jpg
this was the last corrected, inertia dyno run.