Content Wrapper

[hjdistl]

Morri,

Glad it is working out for you.

I have about 500 miles on mine and it still seems to be getting better.

I have a Dyna Super Glide, so not sure anything I have for pictures would help. The front I put up under the tank along the wiring that was already in place. I ended up with the connector at the junction of the down tubes and the back bone and got it all tucked up and wire tied up in there out of sight. I did remove the rear tank bolt and raised the tank to fish the wires in and then replace the bolt for the rear mount ant then did the same for the front. I used a 1 inch wooden dowel to hold the tank up while I fished the wires through. I found the wires just tucked in with the others and had to use very few wire ties.

I think I ran the wires about 10 times before I figured out where I wanted them to end at. I have slack for both the front & back on my set up which I am thankful for. If you want pictures of any of it, let me know and PM me with an e-mail address and I will get them taken and sent to you. Might take a week to get them to you (The old job thing interfering with important things).