Content Wrapper

[BTD]

I have a new SERT and had to buy the HD cables. The &*%$##@ cables are 9 pin connections and my (newer) Dell laptop is 15 pin. After numerous trips all over hell's half acre, I got a 9 pin to USB connection which, when added to the existing wiring, will allow me to connect with the computer with one more piece of cable. Any risk in this set-up before I start? Also, in looking at the cable instructions that I bought with the SERT and the SERT Users Manual, it looks like the connector to the ECM goes on the left hand side with the Screaming Eagle logo facing me and up. Seems like the only connection that works is with the ECM cable on the right hand side with the Screaming Eagle logo facing me and up so it is not the same as in the picture. Is this backwards and if so, any risk here? I sure don't want to fry the SERT or the ECM. Thanks for any insight.