Quote:
|
Originally Posted by itsafatboy
Ok on the 0% and 2.5% table what is a good AFR number to have in there up to the 1250 rpm mark? i currently have 13.0 should it be 12.?
What about the time based iac table leave it with the supplied numbers or leave 0?
on the BLM tables do we leave the 100 in the 0% for the 750,1000,1250,1500 like on the stock table?
on the 2.5% line at 1500 and up is it best to set to 0 or leave at 100 on the blm?
on the basic table should i take out the auto adjust nominal iac it varies for me from 30 to 34.
|
1. 13 is good if you actually are getting it. Adjust the Alpha-N and front trim manually.
2. Leave time based IAC as supplied until your tuned.
3. For front and rear BLM, I would set 0 in the four 750-1500 blocks @ 0% and the same four @ 2.5%. The rest at 100%. Tune these "0" blocks manually. That is what I do and it works good.
4. Uncheck auto adjust IAC and set to 30.
Make sure your idle stop is set to 30 IAC and .4 volts on the throttle position. Let her tune!!
