|
injectors
Allan at DTT told me about a year ago that DTT shipped a lot of injectors which were banded wrongly by their supplier which meant the flow calculations were in error. He said he was going to contact all those who bought them and ship the correct injectors, upon return of the incorrect ones, free of charge. I seem to recollect that this only referred to the high flow injectors in the 6.0 range and not the smaller injectors, however my recollection of the size in error might be a bit fuzzy since it has been so long. He also said no one had complained but when he discovered the error, he wanted to fix it. I assume most bikers who used the BCG dual used stock injectors and not DTT injectors. At that time, DTT had no supply of injectors on hand in the 6.0 range because they discovered the supplier's error and DTT was looking for a different supplier or a fix with that supplier and Marelli was in some sort of transition. This might apply to someone........... .
The following is off of the DTT website, FWIW:
Injector Size Siamesed Runners Dual Independent Runners
3.91 gm/sec (stock 2006) 70 HP Not available
4.22 gm/sec (stock 2001-2005) 75 HP 135 HP
4.89 gm/sec (2006 Screamin EagleŽ) 90 HP Not available
6.0 gm/sec (Twin Tec) 110 HP 195 HP
Seabrook
|
.gif&contenttype=gif "Wheeldock.com")
