Quote:
|
Originally Posted by sstan
LAF, I just picked up a used dual runner throttle body on Ebay. I'll be installing it this weekend with the IID and my just received remapped ECM. It should be real interesting. I think I'll start over with a new map using the gerolamy file that DTT supplies. Let's compare notes on progress.
Steve
|
Yep we need to document and get it down what we find on this adventure. I thought there was another "Duel Runner" using a TCFI here but cant remember who.
I talked to Mark there, and I don't think he would sell you a twin 50 mm UNLESS you have a TCFI. He just does not feel ANY piggy back unit that uses the stock ECU can handle it. Nice guy to talk to, said to make sure you do the cables in order. Hope you get instructions but if not I will share mine if you are not done by then. Not sure but you must do the lower then the uppers as he said they are so tight if you put the top idle cable in you cant get to the bottom one. His words, it is a big unit, and is tight in that space. Also mentioned on some after market heads you may need to clearance in the corners of the bracket for this beastly to fit.
