Content Wrapper

[niget2002]

Okay. I answered my last question on my own. I used the search function, and there is a very good set of instructions for the TPS and idle screw.

Now, for a completely different question.

I have the O2 sensors installed, and all that that entails, but the WEGO II comes with enough extra length in the cable I could probably mount the little box under the tail light...

Is it okay to shorten the length in all the cables? Voltage and ground I know it is. The Blue and White cables are data cables, so my guess there is yes. And the two O2 cables are calibrated for Free air anyways, so they should be okay to shorten as well. I'll solder and shrink wrap all connections.

I just want to get someone else's opinion before I start hacking cables.

I get to start calibrating and running the engine tomorrow! I hooked the new computer up last night just to check there were no codes being thrown... there weren't. I also went ahead and took a look at the TPS value... without touching it, it's at .65, so I'll be taking it off and doing the modifications to it too.