Mine idles approx 18-19 psi at 1000 rpms, @ 195 deg F. Running down the road 45-50 mph at 195-200 deg F. Running Valvoline 20x50 Dino on a new 95 BB with 100 miles on it. Installed the spring when I put the cams in.
Cold, (Room temperature), I have to be careful. Will peg the 60 psi HD gauge if you rev it even slightly. Always allow it to warm up before I ride anyhow so this isn't a problem, more of an FYI thing...
Trying not to let this turn into another Dino vs Syn thread... 
DLR
__________________
I'm less afraid of dieing, than I am of not having lived...
'02 FX"C"ST
95 Screamin' ci.
SBC Heads
Andrew's 37G's 2deg. Adv.
Crane Easy Adjust Rods / Hydro-solids
Bob Wood Performance 415 Carb
SE 2/1 Pro Pipe "V&H" Custom Billet End Cap
Daytona Twin Tec Ignition
Baker 3.60 Gearing
SE / Barnett CF Clutch
Avon 200 x 55 x 18 Rear Tire
Weld Recluse Wheels, Rotors and Pulley
Ness / Cycle Visions Custom 5" Fwd Controls
V1 Engineered 200mm Tire Retrofit
|
.gif&contenttype=gif "Wheeldock.com")
