Quote:
|
Originally Posted by gh67
Hello all, thanks for all the terrific info. I didn't really see a clear answer to "bikersphd's" question. I have a stock ECM flash with PCIII custom dyno tuned map which runs great (hence not wanting to do a stage 1 flash and start over). Can I use the SERT (or any other cheaper devices) to raise my 88B stock rev limiter without affecting my custom map? I realize that the increased rpm range will not have been truly tuned for my bike.
Thanks!
|
My understanding is that Power Commander now has an upgrade that will allow the adjustment of the rev limiter. I believe you can either do a firmware update or send it in for updating. I would check there site and see what is involved.
OK so I went there and tracked down the info for you.....
Quote:
|
Originally Posted by PC web site
The Rev X-tend feature will allow your Harley Davidson (V-rod excluded) with a stock ECM to rev to 6200rpm. No longer is there a need to have your ECM reflashed by your dealer. Now you will have full control over your fuel curve up to 6200rpm with the PCIII USB.
This feature can be enabled on Power Commander III USB units with part #801-511, 802-511, 805-511, 807-511, 810-511, 811-511. To enable units currently in the field it will require a firmware update. The unit can be sent in to Dynojet for $20.00 and we will enable this feature and send it back to you. You also have the option of purchasing a firmware programmer and the necessary software which will allow you to update an unlimited number of units. This package is part #HDREV and can be purchased for $40.00.
|
Here is the link
http://www.powercommander.com/hdRev.shtml
_dec5_08.gif "360 Brake Company")
