Quote:
|
Originally Posted by FXD35
Springer,
2. Are the 2006 maps for the new Dynas with the closed loop O2 sensers included in the current version of the SERT? How often are the maps on the SERT added too? Do you have to buy a new SERT to get them? I know, this is really 3 questions. Sorry.
Thanks Again,
Ron
|
Ron: from the latest version of the SERT Software:
Quote:
New and Changed Features
4.5.2 New and Changed Features
Tuning mode 4.5.2 adds support for certain 2006 vehicles that were left out of the original v4.5.0 software.
4.5.0 New and Changed Features
Tuning mode 4.5.0 adds support for 2006 vehicles with both open and closed loop calibrations. All calibration files released with version 4.5.0 are type ‘MT6’.
The status bar has an additional panel to indicate if a calibration is Open or Closed loop.
The following Tuning File changes were made with Tuning Mode 4.5.0:
· Closed Loop Bias table added to Closed Loop Calibration files
· 127xxxxx-A1.MT5 files were upgraded to 127xxxxx-B0.MT6
· 105xxxxx-C2.MT5 files were upgraded to 105xxxxx-D0.MT6
Version 4.5.0 is supplied with a new set of ‘MT6’ calibration files which are not compatible with earlier ‘
MT2’ or ‘MT5’ versions of Tuning Mode. These new calibrations are either level 127xxxxx-Bx (for 2005) or level 105xxxxx-Dx (for 2001-2004) and all have the file extension 'MT6'.
NOTE: Old MT2 or MT5 calibration files cannot be used for programming with Tuning Mode version 4.5.0. However, old calibration files may be loaded into Tuning Mode 4.5.0, and the calibration table information copied to the equivalent new files using the Clipboard "Cut and Paste" functions.
Refer to Copying and Pasting Table Data for complete details.
|
As Springer noted, current SERT owners can purchase the latest Software CD and have the latest files.
HTH's
Ben
