Quote:
|
Originally Posted by hdtwncam
how would i check this .. only one place to install cable in back of PC
2003 flhrse12
i do not have a current manual ( dealer out of stock) but i am pluged into
the connector under the seat. correct??
|
To check the com port in Xp goto my computer and right click and select properties. Then click the hardware tab at the top and select the button that says device manager. When that opens click the + beside the PORTS section. That will list all your ports and you can click on them and configure them from there. I don't think that is where your problem is.
I believe you have the correct connector but there are 2 that look identical. Your manual will state where the correct one is located, when you get one.
Read post #28 again as it is the only other thing I can suggest. It takes bringing the bike into the dealer to have a stock flash reinstalled to correct the problem it talks about. It may be what you need to do also.
I am out of suggestions otherwise.
.gif&contenttype=gif "Wheeldock.com")
