Content Wrapper

[Seahag]

Originally Posted by hdmd88

The kit is for a EVO or Sportster and its installed in the middle rocker box section. Its very easy to install and it comes with all you need to install it along with good instructions.
If you didn't find the oil carry over try oil pump alignment or oil in the air cleaner.....let me see if I can find it for you.

Is this "nose bleed kit" an EVO part that you can use on the twin cam for something Doc? I've never heard of it. My hypercharger came with a spacer ring that goes in between the air cleaner and carb which has the ports for the head breather. This keeps the oil spray from going into the aircleaner and instead gets sucked right into the carb to be reburned...so I've never gotten the drips.

Another tip I took from Donny Peterson, was drilling out the head breather bolts one size to allow the heads to breathe a little easier...I don't know how much it helps or not but I thought "why not?" since I had the whole motor apart for the big bore anyway....and before you ask, no I can't remember what size drill it was I used.