|
thanks for the reply fausker. I will drop the bowl tonight. We are still waiting for a call back from the local wrench. He did install a new rotor, but that's all I know.
Saturday we checked all ignition components for solid connection and tightness except for the coil. I will get to that tonight. Yesterday I started the bike up, ran it for about 3 minutes and then road around the block. Definately not enough time to heat the engine upto operating temp. There were no signs of the missing for my brief 4 minute ride.
I will check the carb tonight, and start looking for a potential manifold leak. Is there a good way to check for that when the engine is warm. I need to get the bike reproducing the issue, then troubleshoot.
Thanks again,
Boomer
|
