Yup. Pipe, AC, and cams is good for those increases. I'll give you an example.
Buddy of mine with an '07 EG.
Performance slip ons and high flow AC.
Bolted in SE 255 cams and is at 97 lb/ft and 85 hp.
Stock numbers are generally around 80-85 lb/ft and 70 hp. Not sure exactly what he made stock but have no doubt it was right in that range.
Check the dyno section on this and other forums and on some of the aftermarket suppliers sites.
2008 Road Glide
Phoenix Customs Bagger Brace
CP flat tops
R&R Stage 3 heads, .030 gasket, 82cc chambers
Trued, welded, and balanced crank by Hyperformance
TMan 590 cams
HPI 54mm TB
Supermeg with open cap and 15 discs
TTS tune by BVBob
2003 Indian Scout Deluxe
Aspen White (got it for my wife)
S&S "SuperStock" 88"
Last edited by guydoc77; 08-03-2012 at 12:53 AM.