Quote:
Originally Posted by ejk_dyna
i have used them and they are a little bit noisier.
if you adjust your lifters by bottoming out and then backing off a turn...and you have top end clearances a little on the tight side...high rpm valve float will not be good to you...the limiters help there.
|
I've tried them and I didn't care for the noise. I'll stick with the B lifters and what works for me.
Bottoming the plunger and then shortening the push rod by 0.060"is not a whole lot different than lengthening the push rod 0.140" - 0.160" from zero lash. Similar results, different approach.
__________________
99' Lowrider
95" HTCC 10.5:1 pistons
HTCC CNC heads
S&S roller rocker arms
S&S gear drive
Wood's TW408G cams
45mm Mikuni carb
D&D Fatcat
S.E. programmable ignition
Barnett Scorpion clutch
115.2HP/112.7TQ
Last edited by Handfiler : 01-05-2009 at 08:35 PM.
|
