Quote:
Originally Posted by rgsg
Can anyone verify the pinout for the cable from the tuner to the bike? I just bought one and can't communicate with it. I can see it on com5 on my computer, but the red light on the tuner never flashes when I switch the ignition and run switches on. I don't have connections on pins 6,8 of the db9 connector, but do on 7,9.
|
I can't verify the pinout from the tuner (VCI) to the Deutsch connector on the bike. However, the first time you connect the VCI to your computer it will recognize this as a new device (at this point you don't have to connect to the bike yet). If you haven't done so already, go ahead and load the SERT driver in your computer (you'll need the original disk for this). After the driver is loaded for the VCI, go ahead and connect to the bike, start the Super Race Tuner software and you should get the connectivity icon. The red light on the VCI will not come on, this light and the red button is used during dyno testing for recording purposes...shouldn't affect us when reprogramming the ECM (so I've been told).
.gif&contenttype=gif "Wheeldock.com")
